Need help?Do you have a question about the ABB PSE 45 and is the answer not in the manual?
General| Rated Impulse Withstand Voltage (Uimp) | 6 kV |
|---|---|
| Rated Insulation Voltage (Ui) | 690 V |
| Degree of Protection | IP20 |
| Cooling method | Natural convection |
| Rated Operational Voltage | 690 V AC |
| Protection features | Phase Loss |
Explains the meaning of caution, warning, and information signs used in the manual.
Details the markings and terminal connections on the softstarter.
Covers mounting procedures, requirements, and considerations for installation.
Explains electrical connections, including considerations for two-phase control and power circuits.
Details connecting the main power circuit to line and motor terminals.
Covers connections for control supply, functional earth, start/stop, and other control circuits.
Explains the meaning and function of the Ready, Run, Protection, and Fault LEDs.
Details the LCD display layout, keypad functions, and navigation.
Guide on using the keypad to navigate through the softstarter's menu system.
Outlines the methods for setting softstarter parameters using keypad or fieldbus.
Common issues encountered during startup and their solutions.
Troubleshooting guide for various motor and operational problems.
Details specific fault codes, possible causes, and solutions.
Explains indications related to motor overload, underload, and locked rotor protections.
Troubleshooting for failures related to parameter transfer and keypad operations.
To Next Page
