Need help?Do you have a question about the ABB PSE 250 and is the answer not in the manual?
General| Rated Operational Current - In-Line Connection (Ie) | 250 A |
|---|---|
| Rated Operational Power - In-Line Connection (Pe) | 132 kW (at 400 V) |
| Operating Temperature | -25°C to +60°C |
| Degree of Protection | IP20 |
| Weight | 5.5 kg |
| Output current | 250 A |
| Rated Operational Voltage | 208 ... 690 V |
| Rated Control Supply Voltage (Us) | 24V AC/DC |
| Starting Current Limitation | 30 ... 70 % |
| Initial Voltage | 30-70% |
| Mounting Type | DIN rail |
| Dimensions | 150 mm |
| Output voltage | 208 ... 690 V |
| Storage temperature | -40 ... +70 °C |
A concise guide for the easiest way to connect, configure, and start the softstarter.
Instructions for making the electrical connections to the softstarter.
Details on connecting the main power circuit to the softstarter.
Details on how to set and modify the softstarter's parameters.
How to configure the rated motor current parameter (Ie).
Configuration of motor overload protection class and reset type.
Identifies and provides solutions for common start-up issues.
Addresses general operational problems and their resolutions.
Details specific fault codes, their possible causes, and solutions.
To Next Page
