Need help?Do you have a question about the ABB PSE 85 and is the answer not in the manual?
General| Rated Frequency (f) | 50/60 Hz |
|---|---|
| Number of Starts Per Hour at 50% Duty Cycle | 30 |
| Overload Protection | Yes |
| Degree of Protection | IP20 |
| Rated Operational Voltage | 690 V AC |
| Communication | Modbus RTU |
| Mounting Type | DIN rail |
| Operating Temperature (Controller) | -25°C to +55°C |
A brief guide for connecting, configuring, and starting the softstarter.
Explains the meaning of safety symbols used in the manual.
Covers power and control circuit wiring.
Details wiring for control power and signals.
Explains the meaning of different LED lights on the HMI.
Describes the interface elements and navigation controls.
Step-by-step guide on using the keypad for menu operation.
Ways to configure the softstarter's operational parameters.
Comprehensive list of configurable settings, ranges, and default values.
Details various operational functions like ramp times, protections, and torque control.
List and causes of different event codes signaled by the softstarter.
Common issues encountered during initial operation and startup.
Troubleshooting for various operational issues and abnormal motor sounds.
Electrical schematic for fuse and contactor setup.
Electrical schematic for MCCB setup.
To Next Page
