Need help?Do you have a question about the ABB PSE 210 and is the answer not in the manual?
General| Rated Operational Current - AC-53a | 210 A |
|---|---|
| Rated Impulse Withstand Voltage (Uimp) | 8 kV |
| Number of Poles | 3 |
| Frequency (f) | 50 / 60 Hz |
| Degree of Protection | IP20 |
| Maximum Control Supply Voltage (Us Max) | 240V AC |
| Connecting Capacity Control Circuit | Solid 0.75 ... 2.5 mm² Stranded 0.75 ... 2.5 mm² |
| Operating temperature | -25 ... +60 °C |
Explains the meaning of caution, warning, and information signs in the manual.
A rapid guide to connecting, configuring, and starting the softstarter.
Details the markings and terminal connections on the PSE Softstarter unit.
Comprehensive technical data including general specs, weights, and model types.
Provides instructions and requirements for mounting the PSE Softstarter.
General safety and connection guidelines for the PSE Softstarter.
Detailed instructions for all electrical connections of the PSE Softstarter.
Guidance on connecting the main power circuit to the softstarter.
Instructions for connecting control supply voltage and control circuits.
A guide for the initial configuration of frequently used softstarter parameters.
Detailed descriptions of all functions, parameters, default values, and ranges.
Configures the motor overload protection class and reset type.
Procedures for resetting softstarter tripping events via different methods.
A guide to help diagnose and resolve problems with the softstarter.
Addresses common issues encountered during the softstarter's initial start-up.
Covers general faults related to motor operation, commands, and settings.
Details specific fault codes, their possible causes, and recommended solutions.
Explains indications for motor overload, underload, and locked rotor protections.
Lists failure codes, their causes, and suggested troubleshooting steps.
To Next Page
