Need help?Do you have a question about the ABB PSE and is the answer not in the manual?
General| Type | Soft starter |
|---|---|
| Rated Operational Voltage | 208 ... 690 V AC |
| Rated Control Supply Voltage | 100 ... 240 V AC |
| Communication | Modbus |
| Bypass | Built-in |
Lists necessary accessories for connecting the PSE Softstarter to a fieldbus system.
Lists key features and functionalities of the MTQ22-FBP and Modbus TCP protocol.
Explains Modbus TCP as a variant of the Modbus family for automation control over IP networks.
Details the MTQ22-FBP adapter module, its ports, LEDs, and configuration connector.
Describes how to mount and dismount the MTQ22-FBP onto a standard mounting rail.
Explains the point-to-point connection required between the PSE, PS-FBPA, and MTQ22-FBP.
Details how to configure fieldbus parameters on the PSE softstarter.
Describes how to use the PC configuration tool to adjust MTQ22-FBP parameters.
Details how to read digital input telegrams using Modbus function codes.
Details how to write and read digital output telegrams using Modbus function codes.
Describes how to read analog input telegram data as 16-bit values.
States that MTQ22-FBP does not support reading/writing PSE softstarter parameters.
Explains how to read MTQ22-FBP communication status and error codes.
Details how PSE softstarter diagnostics are represented by bits in a register.
To Next Page
