Need help?Do you have a question about the ABB PSE 60 and is the answer not in the manual?
General| Protection class | IP20 |
|---|---|
| Rated Operational Voltage | 690 V AC |
| Output Voltage at Start | 40 ... 70 % of Us |
| Initial Voltage at Start | 30 ... 70 % |
| Mounting Type | DIN rail |
| Input voltage range | 24-230 V AC/DC |
| Operating temperature range | -25 ... +60 °C |
Illustrates the terminal markings and connection points for the softstarter.
Lists key operating conditions, environmental ratings, and standards compliance.
Provides detailed electrical and physical data, including weights.
Outlines steps for inspecting the product upon delivery and before installation.
Provides instructions on how to safely handle and mount the softstarter unit.
Details essential requirements for proper installation, including enclosure and clearances.
Covers general safety and initial considerations for electrical connections.
Outlines essential steps to perform before connecting the softstarter for the first time.
Instructs on connecting the main power circuit to the softstarter terminals.
Details connections for control supply voltage and input/output control circuits.
Explains the procedure for connecting the functional earth terminal.
Guides users through the essential steps for configuring frequently used parameters.
Details parameters for controlling motor start, including ramp time, initial voltage, and kick start.
Explains parameters related to motor stopping, including ramp time and torque control.
Describes settings for electronic overload, underload, and locked rotor protection.
Covers setup for fieldbus communication, including address, parameter download, and fault handling.
Addresses issues encountered during start-up and common operational problems.
Explains fault codes, protection indicators, and their corresponding solutions.
To Next Page
