ABB PM571 - User Manual

________________________________________________________________________________________________________
AC500-eCo - 1 - Hardware Introduction
Hardware Introduction
to
AC500-eCo

Summary

2. AC500-eCo Hardware Descriptions

2.1 CPU Overview

Central unit of AC500 system with onboard digital/analog inputs and outputs.

2.1.1 CPU components

2.1.3 The CPU onboard I;Os

2.1.4 Communication Interfaces

2.1.6 Mode Selection Switch RUN;STOP

2.1.7 Status Display on the AC500 CPU

2.2 S500-eCo I;O Modules Overview

Overview of compact S500-eCo I/O modules for DIN-Rail or wall mounting.

2.2.1 I;O Unit components

3. Hardware Installation and Wiring

ATTENTION Preventing Electrostatic Discharge

Guidelines to prevent damage from electrostatic discharge.

3.1 Hardware Mounting

General instructions for mounting AC500 hardware.

3.1.1 DIN Rail Mounting; re-Mounting

Steps for mounting the AC500 CPU and I/O modules on a DIN rail.

Disassembly of a CPU or the I;O module

3.1.2 Wall Mounting

Steps for mounting the AC500 CPU and I/O modules using wall mounting accessories.

3.2 Wiring

General information and cautions regarding wiring AC500 systems.

3.2.1 Power Supply Wiring

Details on connecting 24V DC and 100-240V AC power supplies.

4. Appendix

4.1 Technical Data

4.2 Order Number

4.3 Guidelines of Safety

Important user information and safety guidelines for AC500-eCo PLC.

Environment and Enclosure Information

Safety technical instructions

General safety instructions for installation, operation, and servicing.

Risk reduction instructions

Instructions to protect devices from damage and ensure safe operation.

4.4 Services and Training

4.4.1 Technical Support Center

Information about ABB's Technical Support Center and contact details.

4.5 Bus System Overview

ABB PM571 Specifications

General

Manufacturer	ABB
Model	PM571
Input Voltage	24 V DC
Communication Ports	Ethernet, RS-232, RS-485
Programming Language	IEC 61131-3
CPU	32-bit RISC
Ethernet	Yes
Real-time clock	Yes
Protection Class	IP20
Number of I/O modules	Max 10
Type	Programmable Logic Controller