Section-0
04-3004_S0_OPM_ABB_POWERSCALE_10-50kVA_EN_150113.doc Page 5/8 ABB
Printed in Switzerland – Modifications reserved
8 SECTION-8:
8.1 TROUBLESHOOTING
8.1.1 ALARMS
8.1.2 MENU, COMMANDS, EVENT LOG AND MEASUREMENTS
8.1.3 FAULT IDENTIFICATION AND RECTIFICATION
9 SECTION-9:
9.1 OPTIONS
9.1.1 INTRODUCTION
9.1.2 REMOTE SHUTDOWN
9.1.3 GENERATOR ON FACILITIES
9.1.4 WAVEMON SHUTDOWN AND MANAGEMENT SOFTWARE
9.1.5 SNMP CARD/ADAPTER FOR NETWORK MANAGEMENT / REMOTE MONITORING
10 SECTION-10: TECHNICAL DATA SHEET
10.1 POWERSCALE SYSTEM DESCRIPTION
10.2 TECHNICAL CHARACTERISTICS
10.2.1 MECHANICAL CHARACTERISTICS POWERSCALE 10-15KVA CABINET A
10.2.2 MECHANICAL CHARACTERISTICS POWERSCALE 10-25KVA CABINET B
10.2.3 MECHANICAL CHARACTERISTICS POWERSCALE 30-50KVA CABINET C
10.3 INPUT CHARACTERISTICS
10.3.1 GRAPH: INPUT PF VERSUS % LOAD
10.3.2 GRAPH: INPUT DISTORTION THDI VERSUS % LOAD
10.4 BATTERY CHARACTERISTICS
10.5 OUTPUT CHARACTERISTICS
10.5.1 GRAPH: AC – AC EFFICIENCY WITH LINEAR LOAD @ COSPHI 1
10.6 ENVIRONMENTAL CHARACTERISTICS
10.7 STANDARDS
10.8 COMMUNICATION
10.8.1 POWER MANAGEMENT DISPLAY (PMD)
10.8.2 MIMIC DIAGRAM
10.8.3 DISPLAY
10.8.4 CUSTOMER INTERFACES (TERMINALS X1 STANDARD)
10.8.5 CUSTOMER INPUTS DRY PORTS: TERMINAL BLOCK X1
10.8.6 CUSTOMER OUTPUTS DRY PORTS: TERMINAL BLOCKS X1 (OPTION RELAY SLOT CARD)
10.9 OPTIONS
10.9.1 SNMP CARD / WAVEMON MANAGEMENT SOFTWARE
To Next Page
Loading...
Need help?
General