ABB PST30 - Page 36

6:2.3 Settings menu
The settings menu is used to set up the softstarter parameters for various applications.
Use the navigation keys to cycle through the various sub menus.
Function Description
Application setting Predened parameters for typical ap-
plications
Basic settings The basic and most used start/stop
settings
Functional settings Language, date, time, etc.
Service settings Service and repair settings
All settings A list with all possible settings
Changed settings A list of all changed settings
Reset all settings Reset all settings to factory default
settings
Operation mode Test mode for softstarter
Figure 20: Settings menu
6:2.4 Local Control menu
The Local Control menu is used to start or stop the motor from the keypad. When local con-
trol is selected, the softstarter can only be controlled by the keypad.
The previous type of control is activated when exiting local control.
Three different selections are possible (see the table below).
Press navigation keys to view different types of local control.
Information!
The LOCAL CONTROL menu can not be entered if Sequence start is selected.
Once the motor has been started in this menu, it must rst be stopped before you leave the
menu. If the motor is already running when the menu is entered, it is possible to leave the
menu without stopping the motor.
Function Description
Start/stop To start and stop the motor with the
keypad
Jog To run the motor as long as Jog is
pressed
DOL start
(PSTB370...PSTB1050 only)
To start and stop the motor with the built-
in by-pass contactor. (See Chapter 3 for
AC3 ratings.)
Figure 21: Local control menu
Chapter 6
Human-Machine Interface (HMI)
Top level
Settings
Application setting
Basic settings
Functional settings
Presentation settings
Service settings
All settings
Changed settings
Reset all settings
Local Control
Event Log
Status Information
Reset Events
Operation mode
Figure 20: Settings menu
Top level
Settings
Local Control
Start / Stop
Event Log
Status Information
Reset Events
Jog
DOL Start
Figure 21: Local control menu
Low Voltage Products & Systems 6.5
ABB Inc. • 888-385-1221 • www.abb-control.com 1SXU 132 021 M0201
6