ABB PST30 - Page 61

Figure 40: Changed Settings menu
Top level
Settings
Application setting
Basic settings
Functional settings
Presentation settings
Service settings
All settings
Changed settings
Reset all settings
Figure 41: Reset all Settings menu
Top level
Settings
Application setting
Basic settings
Functional settings
Presentation settings
Service settings
All settings
Changed settings
Reset all settings
7:2.7.1 Changed Settings
The Changed settings menu consists of all parameters that have been changed from
the factory default setting.
If no parameters have been changed, the LCD will display
No Changed Settings.
7:2.7.2 Reset all Settings
To reset all the changed parameters back to factory default setting, enter this menu.
Conrmation of reset will be displayed as Done on the LCD.
The real time clock, the hour run meter, and the total number of starts will not be af-
fected by the reset.
Chapter 7
Settings and conguration
Low Voltage Products & Systems 7.23
ABB Inc. • 888-385-1221 • www.abb-control.com 1SXU 132 021 M0201
7