21. Ordering for Configured IED
Guidelines
Carefully read and follow the set of rules to ensure order management.
Please refer to the available functions table for included application functions.
To obtain the complete ordering code, please combine code from the tables, as given in the example below.
Example code: REG650*1.3-B01X00-X00-B1X0-D-H-SA-E-SA3B1-AX-F. Using the code of each position #1-11 specified as REG650*1-2 2-3-4
4-5-6-7 7-8-9 9 9-10 10 10 10-11
# 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11
REG650* - - - - - - - - - -
Position
SOFTWARE #1 Notes and Rules
Version number
Version no
1.3
Selection for position #1. 1.3
Configuration alternatives #2 Notes and Rules
Generator protection B01
Generator-Transformer protection B05
ACT configuration
ABB standard configuration X00
Selection for position #2. X00
Software options #3 Notes and Rules
No option X00
Selection for postition #3 X00
First HMI language #4 Notes and Rules
English IEC B1
Selection for position #4.
Additional HMI language #4
No second HMI language
X0
Selection for position #4.
B1
X0
Casing #5 Notes and Rules
Rack casing, 3U 1/1 x 19" D
Selection for position #5. D
Mounting details #6 Notes and Rules
No mounting kit included X
Rack mounting kit for 3U 1/1 x 19" H
Selection for position #6.
Generator protection REG650
1MRK 502 050-BEN B
Product version: 1.3
ABB 67
To Next Page
Loading...
