ABB REG650 - Ordering for Accessories

22. Ordering for Accessories
External resistor unit
High impedance resistor unit 1-ph with resistor and voltage dependent resistor for 20-100V
operating voltage
Quantity: RK 795 101-MA
High impedance resistor unit 1-ph with resistor and voltage dependent resistor for 100-400V
operating voltage
Quantity: RK 795 101-CB
Configuration and monitoring tools
Front connection cable between LCD-HMI and PC Quantity: 1MRK 001 665-CA
LED Label special paper A4, 1 pc Quantity: 1MRK 002 038-CA
LED Label special paper Letter, 1 pc Quantity:
1MRK 002 038-DA
External interface units for Rotor earth fault protection
Injection unit for Rotor earth fault protection (RXTTE 4) Quantity:
1MRK 002 108-BA
Protective resistor on plate. R1 = 100 Ώ, R2 = 120 Ώ Quantity:
RK 795 102-AD
Protective resistor on plate. R1 = 560 Ώ, R2 = 560 Ώ Quantity: RK 795 102-AB
Manuals
Note: One (1) IED Connect DVD containing user documentation
Operation manual
Technical manual
Installation manual
Commissioning manual
Application manual
Communication protocol manual, DNP3
Communication protocol manual, IEC61850-8-1
Communication protocol manual, IEC60870-5-103
Cyber security deployment guidelines
Type test certificate
Engineering manual
Point list manual, DNP3
Connectivity packages and LED label template is always included for each IED
Rule: Specify additional quantity of IED Connect DVD requested
User documentation Quantity:
1MRK 003 500-AA
Generator protection REG650
1MRK 502 050-BEN B
Product version: 1.3
ABB 69