ABB REG670 - Page 142

Combiex
IP15161-1 v1
Key switch for settings
SEMOD130356-4 v6
Key switch for lock-out of settings via LHMI Quantity: 1MRK 000 611-A
Note: To connect the key switch, leads with 10 A Combiflex socket on one end must be used.
SEMOD130267-5 v6
Mounting kit Ordering number
Side-by-side mounting kit Quantity: 1MRK 002 420-Z
Injection unit for Rotor earth fault protection (RXTTE 4)
Note: Requires additional COMBIFLEX terminal base RX4, 10A COMBIFLEX sockets and
appropriate COMBIFLEX mounting accessories for proper operation
Quantity:
1MRK 002 108-BA
Protective resistor on plate Quantity: RK795102-AD
Conguration and monitoring tools
IP15162-1 v2
M15042-3 v4
Front connection cable between LHMI and PC Quantity: 1MRK 001 665-CA
SEMOD131414-4 v3
LED Label special paper A4, 1 pc Quantity: 1MRK 002 038-CA
LED Label special paper Letter, 1 pc Quantity: 1MRK 002 038-DA
Manuals
M15161-3 v13
Note: One (1) IED Connect USB flash drive containing user documentation (Operation manual, Technical
manual, Installation manual, Commissioning manual, Application manual and Getting started guide),
Connectivity packages and LED label template is always included for each IED.
Rule: Specify additional quantity of IED Connect USB flash drive requested
. Quantity: 1MRK 002 290-AE
1MRK 502 074-BEN A
Generator protection REG670 2.2 and Injection equipment REX060,
REX061, REX062
Product version: 2.2.1
142 ABB