ABB REG670 - Page 17

IEC 61850 or
function name
ANSI Function description Generator
REG670
(Customized)
REG670 (A20)
REG670 (B30)
REG670 (C30)
FSTACCS Field service tool access 1 1 1 1
IEC 61850-9-2 Process bus communication, 8 merging
units
0-1 1-P30 1-P30 1-P30
ACTIVLOG Activity logging 1 1 1 1
ALTRK Service tracking 1 1 1 1
PRP IEC 62439-3 Parallel redundancy protocol 0-1 1-P23 1-P23 1-P23
HSR IEC 62439-3 High-availability seamless redundancy 0-1 1-P24 1-P24 1-P24
PMUCONF,
PMUREPORT,
PHASORREPORT1,
ANALOGREPORT1
BINARYREPORT1,
SMAI1 - SMAI12
3PHSUM
PMUSTATUS
Synchrophasor report, 16 phasors (see Table 6) 0-1 1-P34 1-P34 1-P34
PTP Precision time protocol 1 1 1 1
FRONTSTATUS Access point diagnostic for front Ethernet port 1 1 1 1
SCHLCCH Access point diagnostic for non-redundant Ethernet port 6 6 6 6
RCHLCCH Access point diagnostic for redundant Ethernet ports 3 3 3 3
DHCP DHCP configuration for front access point 1 1 1 1
QUALEXP IEC 61850 quality expander 96 96 96 96
Remote communication
BinSignRec1_1
BinSignRec1_2
BinSignReceive2
Binary signal transfer receive 3/3/6 3/3/6 3/3/6 3/3/6
BinSignTrans1_1
BinSignTrans1_2
BinSignTransm2
Binary signal transfer transmit 3/3/6 3/3/6 3/3/6 3/3/6
BinSigRec1_12M
BinSigRec1_22M
BinSigTran1_12M
BinSigTran1_22M
Binary signal transfer, 2Mbit receive/transmit 3 3 3 3
LDCMTRN Transmission of analog data from LDCM 1 1 1 1
LDCMTRN_2M Transmission of analog data from LDCM, 2Mbit 6 6 6 6
LDCMRecBinStat1
LDCMRecBinStat2
LDCMRecBinStat3
Receive binary status from remote LDCM 6/3/3 6/3/3 6/3/3 6/3/3
LDCMRecBinS2_2M Receive binary status from LDCM, 2Mbit 3 3 3 3
LDCMRecBinS3_2M Receive binary status from remote LDCM, 2Mbit 3 3 3 3
1MRK 502 074-BEN A
Generator protection REG670 2.2 and Injection equipment REX060,
REX061, REX062
Product version: 2.2.1
ABB 17