ABB REJ601 - Page 18

Feeder protection and control / Feeder protection
1MDB07221-YN
REF601 / REJ601
Product version: 2.2 FP2
Issued: 2017-05-09
Revision: A
18 ABB
Table 34. Counter
Parameter
Value (Range)
Initial value of the counter at the start of IED, ‘Value’
0…65535, in steps of 1
Binary input configured at PULSE_INPUT, ‘BIconf’
1…4 (1=BI1, 2=BI2, 3=BI3, 4=BI4)
‘-‘ no selection if counter selection not
needed