GUID-D97EFAFB-E205-4755-AEE3-53C32DCF15FC V1 EN
Figure 16: Wall-mounting kit
A 293 mm 1 Side part (2 pieces)
B ∅ 7.5 mm 2 Hexagon socket head cap screw M5x8 (4 pieces)
C 66.5 mm 3 Wall mounting screws (not included)
D 133 mm 4 Front part
E 66.5 mm 5 Torx screw M5x10 (4 pieces)
1. Drill mounting holes according to the dimensional drawing.
2. Mount the side parts with M6 screws (screws not included).
3. Mount the front part with the included M5 screws.
4. Detach the plug-in unit from the case and mount the case to the front part by
tightening the integrated mounting screws 0.7...1.0 Nm.
Section 4 1MRS757641 E
Mounting
26 620 series
Installation Manual
To Next Page
Loading...
