• Abbreviations and acronyms are spelled out in the glossary. The glossary also
contains definitions of important terms.
• Push-button navigation in the LHMI menu structure is presented by using the
push-button icons.
To navigate between the options, use
and .
• Menu paths are presented in bold.
Select Main menu > Settings.
• LHMI messages are shown in Courier font.
To save the changes in nonvolatile memory, select Yes and press
.
• Parameter names are shown in italics.
The function can be enabled and disabled with the
Operation
setting.
• Parameter values are indicated with quotation marks.
The corresponding parameter values are "On" and "Off".
• Input/output messages and monitored data names are shown in Courier font.
When the function starts, the START output is set to TRUE.
• This document assumes that the parameter setting visibility is "Advanced".
1MRS757641 G
Introduction
620 series
Installation Manual
13
To Next Page
Loading...
