Casing Ordering no #5 Notes and rules
1/2 x 19" rack casing, 1 TRM 1MRK000151-VA A
3/4 x 19" rack casing, 1 TRM 1MRK000151-VB B
3/4 x 19" rack casing, 2 TRM 1MRK000151-VE C
1/1 x 19" rack casing, 1 TRM 1MRK000151-VC D
1/1 x 19" rack casing, 2 TRM 1MRK000151-VD E
Selection for
position #5
Mounting details with IP40 of protection from the front Ordering no #6 Notes and rules
No mounting kit included X
19" rack mounting kit for 1/2 x 19" case or 2xRHGS6 or RHGS12 1MRK002420-BB A
19" rack mounting kit for 3/4 x 19" case or 3xRHGS6 1MRK002420-BA B
19" rack mounting kit for 1/1 x 19" case 1MRK002420-CA C
Wall mounting kit 1MRK002420-DA D
1)
Flush mounting kit 1MRK002420-PA E
Flush mounting kit + IP54 mounting seal 1MRK002420-NA F
Selection for
position #6
1) Wall mounting not recommended with communication modules with fiber connection.
Power supply modules Ordering no #7 Notes and rules
Compression terminals 1MRK002960-GA C
Ringlug terminals 1MRK002960-HA R
Power supply module, 24-60 VDC 1MRK002239-AB A
Power supply module, 90-250 VDC 1MRK002239-BB B
Selection for
position #7
Human machine hardware interface Case size Ordering no #8 Notes and rules
Medium size - graphic display, IEC keypad symbols 1/2 x 19", IEC 1MRK000028-AA B
3/4 x 19”, IEC 1MRK000028-BA
1/1 x 19”, IEC 1MRK000028-CA
Medium size - graphic display, ANSI keypad symbols 1/2 x 19", ANSI 1MRK000028-AB C
3/4 x 19”, ANSI 1MRK000028-BB
1/1 x 19”, ANSI 1MRK000028-CB
Selection for
position #8
Line differential protection RED670
1MRK 505 379-BEN N
Hitachi Power Grids 173
© Copyright 2017 Hitachi Power Grids. All rights reserved
To Next Page
Loading...
