28. Ordering for pre-configured IED
GUID-0B941090-4C75-45EE-A406-B7A938251673 v17
Guidelines
Carefully read and follow the set of rules to ensure problem-free order management.
Please refer to the available functions table for included application functions.
PCM600 can be used to make changes and/or additions to the delivered factory configuration of the pre-configured.
To obtain the complete ordering code, please combine code from the tables, as given in the example below.
Example code: RED670 *2.2-B33X00- A02H04-B1X0-AC-CA-B-A3X0-CDAB1RGN1N1XXXXXXX-KKKKXHKKLAGFSX. Using the code of each position #1-11
specified as RED670*1-2 2-3 3 3 3 3 3-4 4-5 6-7 7-8-9 9 9 9-10 10 10 10 10 10 10 10-11 11 11 11 11 11 11 11 11 11 11
Product version Configuration
alternatives
Software options
# 1 - 2 - 3 -
RED670* 2.2 - - -
Language Casing and Mounting Power supply HMI Analog system
4 - 5 6 - 7 - 8 - 9 -
- - - - -
Binary input/output modules Station communication, remote end serial communication and time
synchronization
10 - 11
-
Position
Product version #1 Notes and rules
Version no. 2.2
Selection for position #1 2.2
Configuration alternatives Ordering no #2 Notes and rules
Line differential protection, Multi breaker, 1/3 phase tripping, 2-5 line ends 1MRK004810-FG B33
Line differential protection, Single breaker, 1/3 phase tripping, 2-3 line ends 1MRK004810-GG A42
Line differential protection, Multi breaker, 1/3 phase tripping, 2-3 line ends 1MRK004810-HG B42
Line differential protection, Single breaker, 1/3 phase tripping, with distance
protection
1MRK004810-KG C42
ACT configuration
ABB standard configuration X00
Selection for
position #2
Line differential protection RED670
1MRK 505 379-BEN N
Hitachi Power Grids 171
© Copyright 2017 Hitachi Power Grids. All rights reserved
To Next Page
Loading...
