Commands
Table 8: Command push-buttons
Name Description
Menu
• Moving directly to Main menu, if currently in
any other menu or view.
• Moving to the default view, if currently in
Main menu.
R/L
Changing the control position (remote or local) of
the device.
• When the R LED is lit, remote control is
enabled and local control disabled.
• When the L LED is lit, local control is enabled
and remote control disabled.
• When none of the LEDs are lit, both control
positions are disabled.
Clear
• Activating the Clear/Reset view.
Help
Showing the help menu.
Multipage
Opening alarm panel and selecting alarm page
from the view.
Function buttons
Table 9: Function buttons
Name Description
Function
button
Executing the defined function: OFF, menu short cut or binary control.
6.1.2 Display
GUID-55739D4F-1DA5-4112-B5C7-217AAF360EA5 v13
The LHMI includes a graphical monochrome liquid crystal display (LCD) with a resolution of 320 x
240 pixels. The character size can vary.
The display view is divided into four basic areas.
Section 6 1MRK 500 129-UUS B
LHMI overview
26 670/650 series
Quick start guide
To Next Page
Loading...
