ABB Relion 670 series - General Settings; User Profile Management

The IED User dialog box appears.
4.4.2 General settings
GUID-0326F993-E3F2-4F72-A94F-D8886EB9F6AD v4
In the General
tab, by clicking Restore factory settings the default users can be
restored in the IED Users tool. For the IED series this means reverting back to the
factory delivered users. Performing this operation does not remove the users in the
IED. Nothing is changed in the IED until a “writing-to-IED operation” is
performed.
This is not the same action as Revert to IED defaults in the
recovery menu.
The previous administrator user ID and password have to be given so that the
writing toward the IED can be done.
Editing can be continued by clicking on Restore factory settings when not
connected to the IED.
IEC13000017-2-en.vsd
IEC13000017 V2 EN-US
Figure 7: General tab
4.4.3 User profile management
GUID-74EEBF57-309E-4C97-A5A0-5731E21B9CBE v2
In the User Management tab, the user profiles of the selected IED can be edited.
New users can be created, existing users can be deleted and different user group
members can be edited.
1MRK 511 399-UEN B Section 4
Local user account management
670 series 2.2 IEC 27
Cyber security deployment guideline