ABB Relion 670 series - IEEE 1686 Cyber Security Compliance

IEC12000168-4-en.vsdx
IEC12000168 V4 EN-US
Figure 73: Select Recovery menu
2.
Enter PIN code 8282 and press
.
IE C13000036-4-en.vsdx
IEC13000036 V4 EN-US
Figure 74: Enter PIN code
3.
Select Turn off authority and press
or .
IEC12000170-4-en.vsdx
IEC12000170 V4 EN-US
Figure 75: Turn off Authority
4.
Select OK to turn off the authority and press
.
IEC12000169-4-en.vsdx
IEC12000169 V4 EN-US
Figure 76: Confirm selection
In a Central Account Management enabled IED, the IED will be set to default
after “Turn off authority”. For an IED with local account management, the
below sequence is applicable.
5.
Press
to continue the startup sequence, (now the authority is temporarily
disabled until next reboot of the IED).
To cancel the operation in any step, press
.
Section 7 1MRK 511 399-UEN B
Local HMI use
90 670 series 2.2 IEC
Cyber security deployment guideline