9
*
HMI menu paths are presented as follows:
Use the arrow buttons to select CONFIGURATION\COMMUNICATION
\SPA SETTINGS\PASSWORD SPA.
*
Parameter names, menu names, relay indication messages and relay's HMI
views are shown in a Courier font, for example:
Use the arrow buttons to monitor other measured values in the menus
DEMAND VALUES and HISTORY DATA.
*
HMI messages are shown inside quotation marks when it is good to point
out them for the user, for example:
When you store a new password, the relay confirms the storage by
flashing “---” once on the display.
1MRS752265-MUM
Protection Relay
Installation Manual
RE_ 610
To Next Page
Loading...
