Object control
If the control position of the protection relay is set to local with the R/L button, the
relay can be controlled using the object control buttons.
Table 6: Object control push buttons
Name
Description
Close
Closing the object.
Open
Opening the object.
Navigation
The arrow buttons are used for navigation. To scroll information, press the arrow
button several times or simply keep it pressed down.
Table 7: Navigation push buttons
Name Description
ESC
• Leaving setting mode without saving the values.
• Cancelling certain actions.
•
Adjusting the display contrast in combination with
or .
•
Changing the language in combination with .
•
Running the display test in combination with
.
•
Deleting a character in combination with when editing a string.
•
Inserting a space in combination with when editing a string.
Enter
• Entering parameter setting mode.
• Confirming a new value of a setting parameter.
Up
Down
• Moving up and down in menus.
• Scrolling active digits of a parameter when entering a new setting value.
Left
Right
• Moving left and right in menus.
• Changing the active digit of a parameter when entering a new setting value.
Key
• Activating the authorization procedure, when the user is not logged in.
• Logging out, when the user is currently logged in.
Section 3 1MRS758754 B
REC615 and RER615 overview
24 REC615 and RER615
Operation Manual
To Next Page
Loading...
