GUID-F4595871-6D65-4A6C-B90C-E60A2F097DCE V2 EN
Figure 41: Enable writing to edit a value
The selected setting group is shown in the Setting Group drop-down list. The
active setting group is indicated with an asterisk *.
5. Edit the value.
• The minimum, maximum and step values for a parameter are shown in the
Min., Max. and Step columns.
•
Setting group values are indicated with .
GUID-EE810F3C-DADF-49E7-A68D-4DE0FA41B880 V1 EN
Figure 42: Editing a value
• If the entered value is within the accepted value range, the selection is
highlighted in green. If the value is out of range, the row is highlighted in
red and a warning dialog box is displayed. Write to IED is unavailable.
1MRS758754 B Section 4
Using the HMI
REC615 and RER615 65
Operation Manual
To Next Page
Loading...
