ABB RET630 - 23. Tools

22. Accessories
Table 82. Mounting accessories
Item Order number
Flush mounting kit for one 4U half 19” housing IED 1KHL400040R0001
Semi-flush mounting kit for one 4U half 19” housing IED 1KHL400041R0001
Wall-mounting kit (cabling towards the mounting wall) for one 4U
half 19” housing IED
1KHL400067R0001
Wall-mounting kit (cabling to the front) for one 4U half 19” housing
IED
1KHL400039R0001
19" rack mounting kit for one 4U half 19” housing IED 1KHL400236R0001
19" rack mounting kit for two 4U half 19” housing IEDs 1KHL400237R0001
Overhead/ceiling mounting kit (with cable space) for one 4U half
19” housing IED
1KHL400038P0001
Table 83. Test switch mounting accessories
Item
Order number
19" rack mounting kit for one RTXP8 test switch (the test switch is
not included in the delivery)
1KHL400176R0001
19" rack mounting kit for one RTXP18 test switch (the test switch is
not included in the delivery)
1KHL400177R0001
19" rack mounting kit for one RTXP24 test switch (the test switch is
not included in the delivery)
1KHL400178R0001
Table 84. Connector sets
Item
Order number
Connector set for one 4U half 19" housing IED including analog
input variant 7I (I0 1/5A) + 3U
2RCA023041
Connector set for one 4U half 19" housing IED including analog
input variant 8I (I0 1/5A) + 2U or 7I (I0 1/5A) + 1I (I0 0.1/0.5A) + 2U
2RCA023039
23. Tools
The IED is delivered either with or without
an optional factory made preconfiguration.
The default parameter setting values can be
changed from the front-panel user interface,
the web-browser based user interface
(WebHMI) or the PCM600 tool in
combination with the IED specific
connectivity package.
PCM600 offers extensive IED configuration
functions such as IED application
Transformer Protection and Control 1MRS756788 A
RET630
Product version: 1.0 Issued: 15.09.2009
56 ABB