ABB REV615 - Page 59

60 pages

To Next Page

To Next Page

To Previous Page

To Previous Page

Loading...

Table of Contents

Table of Contents2
Description3
Standard Configurations3
- Functionality Overview for Standard Configuration4
- Standard Configurations5
- Supported Functions6
Protection Functions7
Application7
- Protection of a H-Bridge Connected Capacitor Bank8
- Protection of a Harmonic Filter Circuit in an Industrial Network9
- Protection of a Single Star Connected Capacitor Bank9
Supported ABB Solutions10
Control11
Measurements12
Power Quality12
Disturbance Recorder12
Event Log12
Recorded Data12
Recording and Event Capabilities Overview13
Condition Monitoring13
Trip-Circuit Supervision13
Self-Supervision14
Fuse Failure Supervision14
Current Circuit Supervision14
Access Control14
Inputs and Outputs14
Station Communication15
- Parallel Redundancy Protocol (PRP) Solution16
- High Availability Seamless Redundancy (HSR) Solution17
- Self-Healing Ethernet Ring Solution18
- Supported Station Communication Interfaces and Protocols19
- Dimensions20
- Power Supply20
- Energizing Inputs20
Technical Data20
- Signal Output X100: SO121
- Rtd/Ma Measurement21
- Binary Inputs21
- Signal Outputs and IRF Output22
- Single-Pole Power Output Relays22
- High-Speed Output HSO with BIO000723
- Front Port Ethernet Interfaces23
- Degree of Protection of Flush-Mounted Protection Relay23
- Electromagnetic Compatibility Tests24
- Insulation Tests25
- Mechanical Tests25
- Environmental Tests26
- Three-Phase Non-Directional Overcurrent Protection (Phxptoc)27
- Non-Directional Earth-Fault Protection (Efxptoc)28
- Directional Earth-Fault Protection (Defxpdef)29
- Transient/Intermittent Earth-Fault Protection (INTRPTEF)30
- Negative-Sequence Overcurrent Protection (NSPTOC)31
- Residual Overvoltage Protection (ROVPTOV)31
- Three-Phase Undervoltage Protection (PHPTUV)32
- Three-Phase Overvoltage Protection (PHPTOV)33
- Positive-Sequence Undervoltage Protection (PSPTUV)33
- Negative-Sequence Overvoltage Protection (NSPTOV)34
- Three-Phase Thermal Overload Protection, Two Time Constants (T2PTTR)34
- Circuit Breaker Failure Protection (CCBRBRF)35
- Multipurpose Protection (MAPGAPC)36
- Arc Protection (ARCSARC)36
- Three-Phase Overload Protection for Shunt Capacitor Banks (COLPTOC)37
- Current Unbalance Protection for Shunt Capacitor Banks (CUBPTOC)37
- Three-Phase Current Unbalance Protection for Shunt Capacitor Banks38
- Shunt Capacitor Bank Switching Resonance Protection, Current Based39
- Operation Characteristics40
- Power Quality Functions41
- Voltage Variation (PHQVVR)41
- Voltage Unbalance (VSQVUB)41
- Current Circuit Supervision (CCSPVC)42
- Fuse Failure Supervision (SEQSPVC)42
- Circuit-Breaker Condition Monitoring (SSCBR)42
- Condition and Supervision Functions42
- Measurement Functions43
- Three-Phase Current Measurement (CMMXU)43
- Sequence Current Measurement (CSMSQI)43
- Residual Current Measurement/Three-Phase Voltage Measurement (VMMXU)43
- Sequence Voltage Measurement (VSMSQI)44
- Three-Phase Power and Energy Measurement (PEMMXU)44
- Frequency Measurement (FMMXU)44
- Pulse Timer (PTGAPC)45
- Time Delay off (8 Pcs) (TOFPAGC)45
- Time Delay on (8 Pcs) (TONGAPC)45
Local HMI46
Mounting Methods47
Relay Case and Plug-In Unit47
Selection and Ordering Data47
Mounting Accessories48
Accessories and Ordering Data48
Tools49
Cyber Security50
Terminal Diagrams51
Certificates53
References53
Functions, Codes and Symbols54
Document Revision History57

Related product manuals

Preview: ABB REJ603

Preview: ABB Relion

Preview: ABB RGU-10 B

Preview: ABB SafeRing 36

ABB SafeRing 36