EasyManua.ls Logo

ABB RHD250 - Brake Adjustment; Oil Change

ABB RHD250
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Maintenance
30 RHD250 ... 4000 42/68-165-EN
Pos: 14.6 /Überschri ften/1.1/1-spa ltig/A - C/Bremseneinste llung @ 10\mod_1181642242 218_3101.doc @ 103863
6.2 Brake adjustment
Pos: 14.7 /Wartung / Repara tur/Aktorik/ Antriebe/Allgemein/ Bremseneinstellun g @ 10\mod_1181641915859_ 3101.doc @ 103794
Warning - risk of injury!
Note that the actuator position may be changed accidentally by the repelling power of the
valve when the brake is released!
Since the brake is permanently released in AUT mode it is not exposed to mechanical wear.
Any readjustment is not necessary. Enables users to test the configuration software of the
brake.
Pos: 14.8 /Überschri ften/1.1/1-spa ltig/M - O/Ölwechsel @ 10\mod_11 81652527843_3101. doc @ 104243
6.3 Oil change
Pos: 14.9 /Wartung / Repara tur/Aktorik/ Antriebe/Elektr. Sc hwenkantriebe/Allge mein/Ölwechsel @ 10\ mod_1181632020265_3101. doc @ 103369
Important
Oils for different temperature ranges may not mixed. Dispose of old oil according to local
regulations. Make sure that the oil does not enter the water cycle.
Proceed as follows to drain or change the oil:
1. Provide a container capable of holding the expected oil quantity acc. to chapter Filling
cap
acity.
2. Open and remove the ventilation plug, see Fig. 3.
3. Un
screw the lowermost inspection plug and drain the oil.
4. Make sure all the oil is out of the actuator.
5. Screw in and tighten the oil drain plug.
6. Fill the container with the proper volume of oil and tighten the venting plug.
Pos: 14.10 /Wartung / Rep aratur/Aktorik/ Antriebe/Elektr. Schwenkantriebe/RHD250 ...4000/Schmiermi ttel @ 14\mod_1194255 402968_3101.doc @ 135463
Oil types
Ambient temperature
Default oil filled with delivery Alternative oil
-10 ... 65 °C (15 ... 150 °F) Aral Degol BMB 220
(L-CKC meets ISO TR 3498)
ESSO Spartan EP 220
BP EnergolGR-XP 220
Shell Omala 220
Mobilgear 630
-30 ... 50 °C (-20 ... 130 °F) Mobil SHC 629
-1 ... 85 °C (30 ... 185 °F) Mobil SHC 632
Pos: 14.11 /==== === Seitenumbruch ======= = @ 0\mod_1126532365768_3101.d oc @ 3830

Table of Contents

Related product manuals