ABB S800 - Page 124

Advant Fieldbus 100 Load Section 3 Technical Data and Performance
124 3BSE015969-600 A
Calculation of load for AF100 with a length of max 15,000 m (16,400 yards)
Due to the organization of the Advant Fieldbus 100 scans, some constraints are
imposed on the transmissions. To guarantee message transfer etc., at least 50% of
the fieldbus load is reserved. The remaining load (up to 50%) can be used for S800
I/O station loading and other station loading.
The calculated load of Advant Fieldbus 100 must be equal to or less than 50%.
NOTE! 1 ms cycle time is not allowed.
Table 23. % of load on the Advant Fieldbus 100 by S800 I/O (15,000 m Bus Length)
Cycle
Time
(ms)
Module Type
AI801
AI810
AI890
AI895
AI820
AI830
AI830A
AI835
AO801
AO810
AO810V2
AO890
AO895
AO820
DI801, DI802
DI803, DI810
DI811, DI814
DI820, DI821
DI830, DI831
DI885, DI890
DO801
(1)
, DO802
DO810
(1)
, DO814
(1)
,
DO815
(1)
, DO820
(1)
,
DO821
(1)
, DO890
(1)
(1) Readbacks increase the load depending on the cyclicity and with the same amount as the net load at the cycle time.
For Master the cycle time is 1024 which gives 0.009% more load. For MOD the cycle time is configurable.
DP820
(2)

INSCANT
(2) Total load = (load generated by INSCANT) + (load generated by OUTSCANT)
The total load if INSCANT is 32 ms and OUTSCANT is 64 ms is:
Total load = 1.288 + 0.494 = 1.782%
DP820
(2)

OUT-
SCANT
2
20.60% 15.80% 20.60% 20.64% 15.83% 12.40% 12.40% 20.60% 15.80%
4
10.30% 7.900% 10.30% 10.34% 7.931% 6.200% 6.200% 10.30% 7.900%
8
5.150% 3.950% 5.150% 5.190% 3.981% 3.100% 3.100% 5.150% 3.950%
16
2.575% 1.975% 2.575% 2.615% 2.006% 1.550% 1.550% 2.575% 1.975%
32
1.288% 0.988% 1.288% 1.328% 1.018% 0.775% 0.775% 1.288% 0.988%
64
0.644% 0.494% 0.644% 0.684% 0.525% 0.388% 0.388% 0.644% 0.494%
128
0.322% 0.247% 0.322% 0.362% 0.278% 0.194% 0.194% 0.322% 0.247%
256
0.161% 0.123% 0.161% 0.201% 0.154% 0.097% 0.097% 0.161% 0.123%
512
0.080% 0.062% 0.080% 0.121% 0.093% 0.048% 0.048% 0.080% 0.062%
1024
0.040% 0.031% 0.040% 0.080% 0.062% 0.024% 0.024% 0.040% 0.031%
2048
0.020% 0.015% 0.020% 0.060% 0.046% 0.012% 0.012% 0.020% 0.015%
4096
0.010% 0.008% 0.010% 0.050% 0.039% 0.006% 0.006% 0.010% 0.008%