Drives Integration Section 2 Product Description
52 3BSE015969-600 A
Drives Integration
The ABB Standard and Engineered drives can be connected to the S800 I/O system.
The FCI works as a communication link between the fieldbus master and the drives.
No application software concerning this functionality is stored in the FCI. Check the
available support for each FCI type.
The following drives are considered to be standard drives:
• ACS400 with standard drive
• ACS600/800 with standard application
• ACS600/800 with crane application
• ACS600/800 with pump and fan application (PFC)
• DCS400/500 with standard drive
• DCS600 with crane application
The following drives are considered to be engineered drives:
• ACS600/800 with system application
• ACS600/800 with system application (PMSM)
• ACS600/800 IGBT with supply (ISU) application
• ACS600/800 with Multi Block Programming application ABxR7xxx
• ACS800 with crane application
• ACS800 Rolling Mill Application (RMO) A4xR7xxx
• ACS800LC DSU with diode supply unit applications
• ACS6000C with cyclo converter drive
• ACS6000SD with synchronous drive
• ACS6000AD with asynchronous drive
• ACS1000 with standard drive
• DCS600 with system application
• DCS600 with crane application
To Next Page
Loading...
