ABB | SACE Emax 2
Management operations
3 - Description
21 | © 2023 ABB | 1SDH001000R0002 - ECN000297030
Continued from the previous page
12. Extract the crank. See Figure 48.
13. Replace the crank in its housing See Figure 49.
Figure 48
Figure 49
WARNING! The inserted circuit-breaker must be opened in order to be able to reach the
test position. On the UL version, the fail safe prevents the removal of the circuit-breaker
from the fixed part with springs charged. Discharge the springs before removing the
circuit-breaker from the fixed part. For further details, consult the Mechanical safety
accessories chapter in the document 1SDH001330R1002.
To extract the moving part from the fixed part, perform the same steps indicated for insertion in reverse
order.
Figure 50
Continued on the next page
To Next Page
Loading...
