ABB SACE Emax E1.2 Manual

SACE Emax 2 - Tmax XT
XT7 - XT7M - E1.2-E2.2-E4.2-E6.2
Ekip T&P - XT2 - XT4 - XT7 - XT7M - E1.2 - E2.2 - E4.2 - E6.2
1
2
E2.2
E4.2
E6.2
OK
OK
1
2
XT7
2 1
E1.2
XT7M
Doc. N.° 1SDH001000R0517 - ECN000084121 - Rev. B
A B
XT2
XT4

ABB SACE Emax E1.2 Specifications

General

Rated Voltage [Ur]	Up to 690V AC
Rated Impulse Withstand Voltage [Uimp]	12 kV
Rated Insulation Voltage	1000V
Rated Short-Circuit Breaking Capacity [Icu]	50kA to 100kA (depending on model)
Rated Ultimate Short-Circuit Breaking Capacity (Icu)	50kA to 100kA (depending on model)
Rated Service Short-Circuit Breaking Capacity (Ics)	50kA to 100kA (depending on model)
Poles	3 or 4 poles
Protection Functions	Overload, Short-circuit, Ground fault
Communication	Modbus, Profibus
Trip Unit	Electronic trip unit
Mounting	Fixed, withdrawable
Standards	IEC 60947-2