Need help?Do you have a question about the ABB SACE Emax E1.2 and is the answer not in the manual?
General| Rated Voltage [Ur] | Up to 690V AC |
|---|---|
| Rated Impulse Withstand Voltage [Uimp] | 12 kV |
| Rated Insulation Voltage | 1000V |
| Rated Short-Circuit Breaking Capacity [Icu] | 50kA to 100kA (depending on model) |
| Rated Ultimate Short-Circuit Breaking Capacity (Icu) | 50kA to 100kA (depending on model) |
| Rated Service Short-Circuit Breaking Capacity (Ics) | 50kA to 100kA (depending on model) |
| Poles | 3 or 4 poles |
| Protection Functions | Overload, Short-circuit, Ground fault |
| Communication | Modbus, Profibus |
| Trip Unit | Electronic trip unit |
| Mounting | Fixed, withdrawable |
| Standards | IEC 60947-2 |
To Next Page
