ABB SACO 16D1 - Page 37

37
Code Factory Value and function
setting
V50 - Status information of all 16 channels, HEX coded form
0000 = no active channels
0001 = channel 1 active
0002 = channel 2 active
0003 = channel 1 and 2 active
0004 = channel 3 active
0005 = channel 1 and 3 active
0006 = channel 2 and 3 active
0007 = channel 1,2 and 3 active
0008 = channel 4 active
0009 = channel 1 and 4 active
000A = channel 2 and 4 active
000B = channel 1,2 and 4 active
000C = channel 3 and 4 active
000D = channel 1,3 and 4 active
000E = channel 2,3 and 4 active
000F = channel 1,2,3 and 4 active
-
-
-
FFFF = all 16 channels active
V51 - Status information of the overflow matrix register, HEX coded form
0000 = no active channels
0001 = channel 1 active
0002 = channel 2 active
0003 = channel 1 and 2 active
0004 = channel 3 active
0005 = channel 1 and 3 active
0006 = channel 2 and 3 active
0007 = channel 1,2 and 3 active
0008 = channel 4 active
0009 = channel 1 and 4 active
000A = channel 2 and 4 active
000B = channel 1,2 and 4 active
000C = channel 3 and 4 active
000D = channel 1,3 and 4 active
000E = channel 2,3 and 4 active
000F = channel 1,2,3 and 4 active
-
-
-
FFFF = all 16 channels active
V100 - Reset of alarm channel
1 = reset
V151 - Storing of information in non-volatile memory
1 = storing
V200 - Module SPA slave address
1...99 = address number 1...99