7.2 Labels, connectors and indications of SAM600
modules
7.2.1 SAM600 module identification
GUID-46C75D44-1072-4592-B9E7-2C8119E3B359 v1
All SAM600 modules carry a device label as depicted in Figure 15 allowing to identify a SAM600
module and its basic properties.
IEC18000525 V1 EN-US
Figure 15: SAM600-TS device label
Table 8 lists the details of the information printed on SAM600 labels.
Table 8: SAM600 device label properties
Label (Example) Description
SAM600 1.2-TS-DA-P2 SAM600 module order code.
See
SAM600 Product guide
for more details
P/N 1KHL150036R0110 SAM600 module part number
For internal ABB use only.
S/N PP19150003 SAM600 module serial number
A/N: 1KHL160060R1002G SAM600 module article number
For internal ABB use only.
7.2.2 Connector diagrams
GUID-971383B1-4316-4472-920E-B1A16FF874F9 v1
This section describes the connection interfaces of SAM600 modules, and the LED HMI.
7.2.2.1 SAM600-CT
GUID-D1032B85-0AE5-4BFD-9162-A9E481037F34 v1
SAM600-CT has four current measurement channels and digital inputs for auxiliary signal
supervision. Those channels are accessible via connectors X11-X14 and X10, respectively.
Figure 16 and Figure 17 depict the position and numbering of connectors of the SAM600-CT
module.
Section 7 1MRK 511 434-UEN B
Technical Data
40 SAM600 Process Bus I/O System
Operation Manual
© Copyright 2017 ABB. All rights reserved
To Next Page
Loading...
