What to do if OEM is not running the application image on ABB Relion SAM600-IO Selector switch?
If the OEM is not running the application image for your ABB Selector switch, try rebooting the IED. If the problem continues, update the OEM firmware or consider replacing the board.
How to fix mismatching data batch size to DistRep on ABB Relion SAM600-IO?
To address mismatching data batch size to DistRep in your ABB Selector switch, check the cycle time for SMAI and 3PHSUM blocks connected to Disturbance Report blocks.
What to do if internal faults occur in ABB Relion SAM600-IO?
When internal faults occur in the ABB Selector switch, record the fault indication message and state it when requesting support or service.
General| Brand | ABB |
|---|---|
| Model | Relion SAM600-IO |
| Category | Selector switch |
| Language | English |
Details the contents and purpose of the operation manual for the Switchgear control unit SAM600-IO.
Identifies the target users and their required knowledge for operating protection equipment.
Lists and describes manuals for the IED lifecycle, including set details, revision history, and related documents.
Explains safety symbols, warning/caution icons, and conventions used in the manual.
Explains safety symbols found on the product itself, emphasizing observation of all warnings.
Lists critical safety warnings for installation and operation, emphasizing electrical hazards.
Details cautionary information related to ESD, handling, and potential hazards.
Discusses sustainability considerations in product design, manufacturing, and lifecycle.
Provides guidance on recycling and proper disposal of the IED and its components.
Introduces the available user interfaces for the IED, noting LHMI is not supported and the service kit is used.
Describes the PCM600 software for IED lifecycle management, including planning and engineering.
Details the components and function of the LHMI service kit, including display and keypad.
Covers HMI features like LED indications, front communication, and parameter management.
Step-by-step guide for connecting the service kit to the IED for communication.
Step-by-step guide for safely disconnecting the service kit from the IED.
Explains user roles, rights, and password management for IED access.
Details communication protocols like IEC 61850, GOOSE, and supported network media.
Guides on using the HMI for operations like login, parameter editing, and saving settings.
Covers basic monitoring and checking procedures for the IED during normal use.
Steps for identifying, recording, and analyzing disturbances using the IED.
Setting IED parameters and configurations for functionality and operating conditions.
Procedures for monitoring IED status, indications, recorded data, and remote status.
Procedures for clearing and acknowledging IED status and fault indications via HMI.
Procedures for changing IED settings, activating, and managing setting groups.
Steps to identify and diagnose hardware, runtime, communication errors, and use LHMI hint menu.
Explains internal faults, warnings, and additional indications found in the IED.
Steps for resolving identified issues, including user management and inspecting wiring.
Defines technical terms and acronyms used throughout the manual for clarity.
To Next Page