ABB ScreenMaster RVG200 Battery Replacement Procedure

—
ABB MEASUREMENT & ANALYTICS | INSTRUCTION | IN/RANDC/006-EN REV. A
ScreenMaster RVG200
Paperless recorder
Battery replacement
Measurement made easy
1 Introduction
This publication details replacement of the battery
(B12454) fitted to the baseboard of the RVG200
Paperless recorder. The procedure must be carried
out by a trained technician.
Tools required
• Medium flat-bladed screwdriver
2 For more information
Further information is available from:
www.abb.com/recorders
or by scanning these codes:
Sales Service
3 Safety
IMPORTANT NOTE
Dispose of the old components as detailed in the
Operating Instructions (OI/RVG200-EN).
ScreenMaster RVG200
paperless recorder

ABB ScreenMaster RVG200 Specifications

General

Type	Paperless recorder
Analog Outputs	Up to 6 (optional)
Weight	Approx. 1.5 kg (3.3 lbs)
Display	TFT LCD
Input Channels	Up to 24
Input Types	Thermocouple, RTD, mA, mV, V
Measurement Types	Temperature, pressure, flow, level, etc.
Accuracy	±0.1% of span
Data Storage	SD card, USB
Communication Interfaces	Ethernet, RS485, USB
Power Supply	100 to 240 V AC, 24 V DC
Operating Temperature	-10 to +50 °C (14 to 122 °F)
Protection Class	IP66 (front)
Dimensions	144 x 144 x 158 mm (5.67 x 5.67 x 6.22 in)