ABB SM500F Instruction

—
ABB MEASUREMENT & ANALYTICS | INSTRUCTION | IN/RANDC/007-EN REV. A
SM500F
Field mountable paperless recorder
Battery replacement
Measurement made easy
1 Introduction
This publication details replacement of the battery
(B12454) fitted to the processor board of the
SM500F Paperless recorder. The procedure must be
carried out by a trained technician.
Tools required
• T8 Torx driver
2 For more information
Further information is available from:
www.abb.com/recorders
or by scanning these codes:
Sales Service
3 Safety
IMPORTANT NOTE
Dispose of the old components as detailed in the
instruction manual (IM/SM500F).
SM500F
field mountable
paperless recorder

ABB SM500F Specifications

General

Measurement Range	Depends on input type
Number of pens	1 or 2
Electrical Connection	Screw terminals
Battery Life	Not applicable
Chart diameter	Not applicable
Input types	mA, V, RTD, TC
Power supply	100 to 240 V AC, 50/60 Hz or 24 V DC
Output Signal	Relay
Process Connection	Not applicable
Protection Class	IP66