ABB TPL65-A33 - Page 93

Operation Manual / TPL65-A32 / -A33 / -A36 + TPL69-A32 / -A33
8 Disassembly and assembly / 8.7 Installing cartridge group
© Copyright 2020 . All rights reserved. HZTL2498_EN Rev.F December 2020
CAUTION
If the rotor blades have insufficient or no clearance, the blades and cas-
ing could be damaged.
u Turn rotor to check that blades do not rub against turbine diffuser.
u Remove the lifting gear.
u Screw in the speed sensor (86505) along with the O-ring (86506) and
plug in the cable connector (86515).
u Fit the O-ring (77005) to the wall insert (77000).
u Fit the lifting gear and the swivel lifting eye (90235).
u Align and fit the wall insert (77000) using the centring screw (90187).
u Place the diffuser (79000) in position using the swivel lifting eye
(90235).
u Remove the swivel lifting eye (90235).
u Fit the screws (72002).
Page 91 / 123