Operation Manual / TPL67-C.. - TPL71-C..
Hazards during operation and
maintenance
Page 27
2017 ABB. All rights reserved.
February 2017 HZTL2488_EN Revision D
Hot surfaces on the non-insulated turbocharger
Non-insulated turbochargers can cause serious injuries to personnel
(burns).
The turbocharger is supplied by ABB Turbo Systems without insulation
depending on the order from the enginebuilder. If supply is without insu-
lation, the enginebuilder is responsible for providing the turbocharger
with proper insulation and for providing protection against contact with
hot surfaces.
Compliance with the instructions and specifications given by the en-
ginebuilder to protect against hot turbocharger surfaces is compulsory.
Wear safety gloves to protect against thermal hazards.
Hazards due to operating and auxiliary materials
Operating and auxiliary materials are substances used for operation or the
execution of maintenance work. Oils, greases, coolants, cleaning agents
and solvents, acids, etc. can be regarded as hazardous materials. Operat-
ing and auxiliary materials can be combustible and easily ignited.
Handling operating and auxiliary materials
Ingestion or inhalation of vapours of operating and auxiliary materials or
contact with such can cause damage to health.
Avoid inhalation and contact with the skin.
Ensure good ventilation.
Observe details in the safety data sheets of the operating and auxil-
iary materials.
Observe local laws.
Wear safety goggles.
Wear safety gloves to protect against chemical hazards.
Wear a respiratory mask to protect against gases.
To Next Page
Loading...
Need help?
General
