Operation Manual / TPL67-C.. - TPL71-C..
Cleaning components mechanically
Page 73
© Copyright 2017 ABB. All rights reserved.
February 2017 HZTL2488_EN Revision D
4. When the cartridge group is suspended horizontally, attach a chain
block to the swivel lifting eye and attach to the first crane.
5. Tighten chain block until entire cartridge group is suspended from first
crane.
6. Remove loop from second crane.
Selection of the cleaning agent
Cleaning agents which contain chlorine attack metals.
Use only pH-neutral cleaning agents which do not attack metals.
Observe safety data sheet.
Fill the tank with soaking liquid.
Only immerse the cartridge group until all blades are covered with
cleaning agent.
To Next Page
Loading...
