Operation Manual / TPL73-B.. - 85-B11/ -B12
5 Maintenance / 5.5 Cleaning turbine blades and nozzle ring in opera-
tion
© Copyright 2018 . All rights reserved. HZTL2480_EN Revision D July 2018
5.5.3 Non-integrated dry cleaning device for the turbine
and nozzle ring
As an alternative to the built-in dry cleaning system, a non-integrated dry
cleaning device can be installed in front of the gas inlet casing by the en-
gine manufacturer.
Operating state prerequisites for non-integrated dry cleaning
device
In order to carry out a successful cleaning procedure that has been
tested and is recommended by ABB Turbo Systems, the following pre-
requisite must be met:
w Engine load 25 ... 85%
u Start the cleaning cycle according to the following description Oper-
ating the non-integrated dry cleaning device.
Page 76 / 151
To Next Page
Loading...
