20
CURRENT AND VOLTAGE INSTRUMENT TRANSFORMERS
INSTRUCTIONS FOR INSTALLATION, USE AND MAINTENANCE
The repair kit contains material for 10 individual
repairs. It is intended for ABB products only.
The repair kit includes:
Paint roller brush
10 pieces of roller covers wide 5 cm
Thinner S6300
Plus
Repairing according to next steps:
2) Mix both components of the filling putty in the
3) Apply the prepared sealant to the damaged
6) Always apply the spray from a distance of ap
in the ratio:
8) Mix both components thoroughly and then ap
mixture around the damaged area until proper
layers until the repaired area has the same shade
Note:
This kit can be used to repair minor surface dam-
ages at your own risk and responsibility.
In case of major damage, contact the supplier.
Appendix 6
Repair kit for metal coated voltage transformers
1
2
3
4
5
6
7
8
9
10
To Next Page
Loading...
