21
Clean VT cones with the duster (ideally with
Staubfix super, 80x50cm which does not leave
its parts on the surface of the cones) and grease
them (1) with insulating vaseline/paste (3, 4, 5).
The surface must be clean. Use a brush (2) to ap-
ply the insulating vaseline/paste.
The example of mounting on a board for mount-
ing in the switchboard panel.
Components from 2R...
Name Nr. Amt.
PT Sheet
Appendix 7
Assemble the PT Sheet
2
1
1
2
3 54
To Next Page
Loading...
