17
There are few possibilities of handling:
1) Manual handling
Transformers can be handled by hands in case
the weight of the transformer is not higher than
grasp of the transformers always use handling
Note. This system is recommended for metal
coated instrument transformers TJMC, TJMP or
TDMC. Types TJP, TDP, never handle by gripping
the fuse holder – risk of break.
Transformers heavier than 25 kg can be handled
by hands in case the transformer is equipped
be carried by at least two persons using the base
2) Handling by belts
handling can be done by hanging of the trans
Note. This system is recommended for types:
TTR, TSR, BB(O), KOKS. Hanging systems for
those types are visualized on pictures.
Safety warning!
the crane has to be at least 200 kg. Always make
sure that the belts hold safely on the crane and
on the transformer.
Appendix 4
Handling with transformers
—
11
—
12
—
11 Manual handling
—
12 Transformer
hanging on belts
To Next Page
Loading...
