ABB TRIO-5.8-TL-OUTD - Page 73

- 73 -
000331BG
7 - Operation
The grid standards that can be selected are listed in the following table:
Displayed name Country Grid Standard Display language
VDE 0126 GERMANY-VDE0126@400V ENGLISH
RD 1699 SPAIN RD1699 @ 400V SPANISH
UK G83 UK – G83 @ 400V ENGLISH
UK G59 UK – G59 @ 400V ENGLISH
IRELAND IRELAND @ 400V ENGLISH
AS 4777 AUSTRALIA @ 400V ENGLISH
ISRAEL. ISRAEL @ 400V ENGLISH
FRANCE FRANCE LL 2013 @ 400V FRENCH
NETHERL. NETHERLANDS @ 400V DUTCH
GREECE GREECE @ 400V ENGLISH
PORTUGAL PORTUGAL @ 400V ENGLISH
CORSICA CORSICA @ 400V FRENCH
HUNGARY HUNGARY @ 400V ENGLISH
TAIWAN TAIWAN @ 400V ENGLISH
CZECH CHECA Republic @ 400V CZECH
VDE 4105 GERMANY – VDE AR-N-4105 @ 400V GERMAN
CEI021 EX ENEL CEI-021 @ 400V EXTERNAL Prot. ITALIAN
CEI021 IN ENEL CEI-021 @ 400V INTERNAL Prot. ITALIAN
S.AFRICA SOUTH AFRICA @ 400V ENGLISH
RD 1565 SPAIN RD 1565 @ 400V SPANISH
C1011 100 BELG C10-11 100% @ 400V FRENCH
C1011 110 BELG C10-11 110% @ 400V FRENCH
BRAZIL BRAZIL @ 380V ENGLISH
TURKEY LV TURKEY LV @400V ENGLISH
ROMANIA ROMANIA @400V ENGLISH
SLOVENIA SLOVENIA @400V ENGLISH
TURKEY HV TURKEY HV @400V ENGLISH
CEI 016 CEI-016 @ 400V ITALIAN
EN 50438 EN50438 generic @ 400V ENGLISH
FRANCE 14 FRANCE LL 2014 @ 400V FRENCH
THAIL MEA THAILAND MEA @ 400V ENGLISH
THAIL PEA THAILAND PEA @ 380V ENGLISH
SINGAPORE SINGAPORE @ 400V ENGLISH
The list of grid standards given in the table was valid at the time of issue of the manual. It will
be continually updated as new country standards with which the inverter is compatible are
introduced
Once the guided conguration procedure is completed, the inverter restarts to apply the pa-
rameter settings
• When the inverter comes on again, it rst checks the input voltage:
- If the DC input voltage is lower than the Vstart voltage (voltage required
for the inverter to connect to the grid), icon b14 remains off and the mes-
sage "Waiting Sun" is displayed in b10.
- If the DC input voltage is higher than the Vstart voltage, icon b14 is di-
splayed and the inverter goes to the next stage in the checks.
In both cases the input voltage and current are displayed in elds b15
and b16.
Vin < Vstart
Vin > Vstart