—
ABB MEASUREMENT & ANALYTICS | COMMISSIONING INSTRUCTION | CI/TZIDC-200/ATEX/IECEX-EN REV. C
TZIDC-200
Digital Positioner
—
ABB Measurement & Analytics
For your local ABB contact, visit:
www.abb.com/contacts
For more product information, visit:
www.abb.com/positioners
ATEX / IECEx
Digital Positioner for the
positioning of pneumatically
controlled final control elements.
CI/TZIDC-200/ATEX/IECEX-EN Rev. C 05.2020
—
TZIDC-200
Introduction
The TZIDC-200 has an integral mount design,
features a modular structure and offers an
outstanding price-performance ratio. Fully
automatic determination of the control parameters
and adaptation to the final control element allow for
considerable time savings as well as optimum
control behavior.
Additional Information
Additional documentation on TZIDC-200 is available
for download free of charge at
www.abb.com/positioners.
Alternatively simply scan this code:
—
We reserve the right to make technical changes or modify the contents of this document
without prior notice. With regard to purchase orders, the agreed particulars shall prevail.
ABB does not accept any responsibility whatsoever for potential errors or possible lack of
information in this document.
We reserve all rights in this document and in the subject matter and illustrations contained
therein. Any reproduction, disclosure to third parties or utilization of its contents – in whole or
in parts – is forbidden without prior written consent of ABB.
© ABB 2020 3KXE341204R4401
To Next Page
Need help?
General
