Need help?Do you have a question about the ABB TZIDC-110 and is the answer not in the manual?
Introduces the positioner and its supported communication technologies like HART and Fieldbus.
Specifies the required qualifications for personnel installing, commissioning, and maintaining the product.
Important safety precautions to be followed during the installation of the unit.
Guidelines for safe electrical connections and compliance with relevant standards.
Key requirements and preconditions for the safe operation of the positioner in Ex environments.
Details the mounting kit and procedure for attaching the positioner to linear actuators.
Details the mounting kit and procedure for attaching the positioner to rotary actuators (VDI/VDE 3845).
Critical warning regarding the use of the integrated communication interface in Ex areas.
Details the assignments of screw terminals for various modules and functions.
Guide for setting upper and lower switching points for digital feedback using proximity switches.
Steps for setting contacts and connecting micro switches for 24 V feedback.
Guides through feeding power, checking the mount, and running Autoadjust for TZIDC.
Explains the availability and process of the Autoadjust feature for linear and part-turn actuators.
Describes the different operating modes (1.0, 1.1, 1.2, 1.3) and their indicators.
Step-by-step procedure for performing a functional check on the emergency shutdown module.
Provides ATEX certification details, temperature classes, and ambient temperature ranges.
Presents IECEx certification, type marking, temperature classes, and electrical data.
Details CSA certification, groups, enclosure type, and entity parameters.
Presents the CSA certification record with entity parameters and installation drawing reference.
Lists FM approval details for the TZIDC positioner, including entity and FISCO parameters.
Provides an overview of the FM Control Document, showing hazardous/non-hazardous area connections.
Presents EC type-examination certificate details, temperature classes, and electrical data.
Details CSA certification, entity parameters, and installation drawing for TZIDC-110.
Presents the CSA certification record with entity parameters and installation drawing reference.
Lists FM approval details, entity and FISCO parameters for TZIDC-110.
Provides an overview of the FM Control Document for TZIDC-110.
Presents EC type-examination certificate details, temperature classes, and electrical data.
Details CSA certification, entity parameters, and installation drawing for TZIDC-120.
Presents the CSA certification record with entity parameters and installation drawing reference.
Lists FM approval details, entity and FISCO parameters for TZIDC-120.
Provides an overview of the FM Control Document for TZIDC-120.
Introduces the positioner and its supported communication technologies like HART and Fieldbus.
Specifies the required qualifications for personnel installing, commissioning, and maintaining the product.
Important safety precautions to be followed during the installation of the unit.
Guidelines for safe electrical connections and compliance with relevant standards.
Key requirements and preconditions for the safe operation of the positioner in Ex environments.
Details the mounting kit and procedure for attaching the positioner to linear actuators.
Details the mounting kit and procedure for attaching the positioner to rotary actuators (VDI/VDE 3845).
Critical warning regarding the use of the integrated communication interface in Ex areas.
Details the assignments of screw terminals for various modules and functions.
Guide for setting upper and lower switching points for digital feedback using proximity switches.
Steps for setting contacts and connecting micro switches for 24 V feedback.
Guides through feeding power, checking the mount, and running Autoadjust for TZIDC.
Explains the availability and process of the Autoadjust feature for linear and part-turn actuators.
Describes the different operating modes (1.0, 1.1, 1.2, 1.3) and their indicators.
Step-by-step procedure for performing a functional check on the emergency shutdown module.
Provides ATEX certification details, temperature classes, and ambient temperature ranges.
Presents IECEx certification, type marking, temperature classes, and electrical data.
Details CSA certification, groups, enclosure type, and entity parameters.
Presents the CSA certification record with entity parameters and installation drawing reference.
Lists FM approval details for the TZIDC positioner, including entity and FISCO parameters.
Provides an overview of the FM Control Document, showing hazardous/non-hazardous area connections.
Presents EC type-examination certificate details, temperature classes, and electrical data.
Details CSA certification, entity parameters, and installation drawing for TZIDC-110.
Presents the CSA certification record with entity parameters and installation drawing reference.
Lists FM approval details, entity and FISCO parameters for TZIDC-110.
Provides an overview of the FM Control Document for TZIDC-110.
Presents EC type-examination certificate details, temperature classes, and electrical data.
Details CSA certification, entity parameters, and installation drawing for TZIDC-120.
Presents the CSA certification record with entity parameters and installation drawing reference.
Lists FM approval details, entity and FISCO parameters for TZIDC-120.
Provides an overview of the FM Control Document for TZIDC-120.
General| Power supply | 24 V DC |
|---|---|
| Communication | HART |
| Housing material | Aluminum |
| Ambient temperature | -40 to +85 °C (-40 to +185 °F) |
| Supply pressure | 1.4 to 7 bar (20 to 100 psi) |
| Ambient temperature range | -40 to +85 °C (-40 to +185 °F) |
| Enclosure rating | IP66/NEMA 4X |
| Communication protocol | HART |
| Input signal | 4-20 mA |
| Mounting | Directly on the actuator |
To Next Page
