Safety
42/18-84-EN TZIDC, TZIDC-110, TZIDC-120 11
1.11 Returning devices
Use the original packaging or suitably secure shipping containers if you need to return the
device for repair or recalibration purposes. Fill out the return form (see the Appendix) and
include this with the device.
According to EC guidelines for hazardous materials, the owner of hazardous waste is
responsible for its disposal or must observe the following regulations for shipping purposes:
All devices delivered to ABB Automation Products GmbH must be free from any hazardous
materials (acids, alkalis, solvents, etc.).
Please
Please contact Customer Center Service acc. to page 2 for nearest service location.
1.12 Integrated management system
ABB Automation Products GmbH operates an integrated management system, consisting of:
• Quality management system to ISO 9001:2008
• Environmental management system to ISO 14001:2004
• Occupational health and safety management system to BS OHSAS 18001:2007 and
• Data and information protection management system
Environmental awareness is an important part of our company policy.
Our products and solutions are intended to have a minimal impact on the environment and on
people during manufacturing, storage, transport, use, and disposal.
This includes the environmentally-friendly use of natural resources. We conducts an open
dialog with the public through our publications.
To Next Page
Loading...
Need help?
General
