48
—
6. Assembly of the switchgear at site
Figure 57: Example of UniGear ZS1 12 / 17.5 kV for 2 500 A on foundation frame on concrete floor. Panel with examples of gas duct
including chimneys or pressure relief to the outside.
A Typical panel depth A = 1340 mm – however always consider annotation 2)
1) Minimum dimensions; recommended space 500 mm
2) Dimension must be verified according to documentation of the relevant order
Figure 58: Example of UniGear ZS1 12 / 17.5 kV for 3 150 / 4 000 A on foundation frame on concrete floor. Panel with examples of
gas duct including chimneys or pressure relief to the outside.
B Typical panel depth B = 1340 mm – however always onsider annotation 2)
1) Minimum dimensions; recommended space 500 mm
2) Dimension must be verified according to documentation of the relevant order
To Next Page
Loading...
